91VG SAW CHAIN
Oregon® 91VG saw chain is specially designed to incorporate all the advan-
tages of our professional series in a consumer style, low-kickback saw
chain. 91VG is ideal for occasional users, but is also extremely well suited
for commercial cutters such as arborists and orchardists who prefer small-
size saws and lightweight low-profile 91-type saw chain that conforms to low
CHAIN PITCH AND GAUGE
PITCH
3/8”
kickback performance requirements for the United States and Canada.
GAUGE
91VG .050”
KICKBACK – ANSI CLASSIFICATION
Features
Benefits
91VG saw chain is a low kickback saw
chain. It met the kickback performance
requirements of ANSI B175.1 (USA),
and CSA Z62.3 (Canada) when tested
on a representative sample of chain-
saws. Its safety features significantly
reduce the hazard of kickback while
maintaining high cutting performance.
ALL CUTTING SAW CHAINS CAN
KICKBACK, which may result in severe
personal injury to the saw operator or
bystanders. Operate your saw safely.
Read all warnings in your chainsaw
operator’s manual.
•
•
Improved out-of-box grind
Dramatic speed improvements in all
cutting modes
Advanced grind geometry
•
•
Extreme cutting efficiency, less feed
force required
Twin cutting corners offering outstanding
performance, durability and easy mainte-
nance
™
Chamfer Chisel cutters with
special shaped low-vibration heels
•
•
Less vibration than competitive chains
Ramp-shaped depth gauges
Bumper tie straps with slots
The ramp-shape reduces kickback
RECOMMENDED TYPES OF USE
energies without affecting performance
•
•
•
Delivers low-kickback performance
Enhances chip flow
Reduces overall weight of saw chain
Occasional
Commercial
Sharpens with standard 5/32”
•
Easy hand maintenance
RECOMMENDED SAW SIZES
round file and file guide
Vibe-Ban™
Reduces vibration 25% or more at the
saw handle
•
™
LubriLink tie straps
Help keep oil where it’s needed - on the
chain
Directs oil to the critical rivet flange/hole
interface
•
•
91VG is intended for use with electric
saws and smaller gasoline-powered
saws up to 2.5 cu. in. (41cc)
RECOMMENDED BAR LENGTHS
Lubriwell™ oil holes
•
•
Help carry oil around the full length of the
guide bar’s groove
Enhances lubrication of the bar nose
sprocket and bearings
10 in. to 18 in. (25 to 46 cm)
KICKBACK-REDUCING FEATURES
Ramp-shaped
•
depth gauges on
each cutter
Bumper tie straps
•
CUTTER SEQUENCE
Standard sequence: 91VG
91VG F&B
A107041 AA 0806
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Hand Filing Instructions OREGON 91VG
FILE SIZE: Use a 5/32” round file and file guide
TOP-PLATE
FILING ANGLE:
FILE HANDLE
DOWN ANGLE:
DEPTH-GAUGE SETTING:
See warning below
FINISHED
CUTTER:
*
.025”
30˚
.0˚
®
Grinding Instructions OREGON 91VG
GRINDING WHEEL THICKNESS: 1/8”
TOP-PLATE
GRINDING ANGLE:
TOP-PLATE
SHARPNESS ANGLE:
DEPTH-GAUGE SETTING:
See warning below
FINISHED
CUTTER:
DOWN ANGLE:
*
.025”
50˚
.0˚
30˚
Failure to follow filing instructions can increase
the level of kickback which can result in severe
injury to the saw operator or bystanders.
Oregon® 91VG saw chain is low-kickback saw chain. It met the
kickback performance requirements of ANSI B175.1 (US) and
CSA Z62.3 (Canada) when tested on a representative sample of chainsaws. Its safety features
significantly reduce the hazard of kickback while maintaining high-cutting performance.
Do not exceed the depth-gauge setting shown above
Always file depth gauges back to their original rounded or ramp
shape after lowering
*
*
ALL CUTTING SAW CHAIN CAN KICKBACK, which may result in severe injury to the saw
operator or bystanders. Operate your saw safely. Read and follow all warnings
in your chainsaw operator’s manual.
Maintenance Tools
Depth Gauge
Tool, .025”
File Size
Assembled File Round Files
Guide
Flat File
Bench Grinder Mini Grinder
Wheel, 4 1/8”
Wheel 5 3/4”
5/32”
37534 (EA.)
70504 (12-PK.)
40458 (2-PK.)
22290 (10-PK.)
12211 (12-PK.)
OR534-18
OR4125-18
Chain Replacement Parts
Right-hand Cutter Tie Strap
Chain Type
Left-hand Cutter
P21693
Preset Tie Strap
Drive Link
P21721
91VG
P21694
P24295
P25068
NOTE: Individual parts packages contain 25 pieces.
®
For more information on these and other Oregon products, contact your authorized Oregon distributor, or:
®
OREGON CUTTING SYSTEMS DIVISION, BLOUNT, INC. PO Box 22127 · Portland, OR, U.S.A. 97269-2127
IN CANADA: OREGON DISTRIBUTION LTD. 505 Edinburgh Rd. N., Guelph, Ontario, Canada N1H 6L4
Phone: 519-822-6870 Fax: 519-822-4999
Printed in USA 91VG F&B A107041 AA 0806
Download from Www.Somanuals.com. All Manuals Search And Download.
|