®
ELECTRIC CHAIN SAW
OWNER’S MANUAL
MODELS EL-8: 107624-02, 107625-02, 111174-01
IMPORTANT: Read and understand this manual before assem-
blingoroperatingthischainsaw.Improperuseofsawcancause
severe injury. Keep this manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
STOPP
PARA
ARRÉT
DO NOT RETURN PRODUCT TO STORE.
CALL 1-800-626-2237 FOR TECHNICAL ASSISTANCE
This manual is your guide to safe and proper operation of the saw.
SAVE THESE INSTRUCTIONS.
Keep your purchase receipt for warranty coverage.
NO DEVUELVA EL PRODUCTO A LA TIENDA
PARA AYUDA TÉCNICA LLAME AL 1-800-626-2237
Este manual es su guía para utilizar esta sierra eléctrica de
manera adecuada y segura.
GUARDE ESTAS INSTRUCCIONES.
Guarde su recibo de compra para cobertura de la garantía.
NE RETOURNEZ PAS LE PRODUIT AU DÉTAILLANT
FAITES LE 1 800 626-2237 POUR OBTENIR
DE L’ASSISTANCE TECHNIQUE
C’est un guide pour l’utilisation sécuritaire et correcte de la tronçonneuse.
CONSERVER CES DIRECTIVES
Conservez votre reçu d’achat pour obtenir le service sous garantie.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
IMPORTANT SAFETY INFORMATION ...............................................................................4
Before Operating Saw........................................................................................................................4
While Operating Saw..........................................................................................................................4
Kickback.............................................................................................................................................5
Maintenance and Storage of Chain Saw............................................................................................6
UNPACKING........................................................................................................................6
PRODUCT IDENTIFICATION ..............................................................................................7
CHAIN SAW NAMES AND TERMS.....................................................................................8
ASSEMBLY..........................................................................................................................9
SAW CHAIN TENSION ADJUSTMENT ............................................................................10
OPERATING CHAIN SAW.................................................................................................11
Filling Oil Tank ..................................................................................................................................11
Oiling Chain......................................................................................................................................11
Extension Cords...............................................................................................................................11
Cutting with the Chain Saw ..............................................................................................................12
Felling a Tree (Cutting Down a Tree) ...............................................................................................12
Limbing a Tree..................................................................................................................................14
Bucking a Log...................................................................................................................................14
Trimming a Tree (Pruning)................................................................................................................15
CLEANING AND MAINTENANCE ....................................................................................16
Cleaning Saw Body..........................................................................................................................16
Care of Guide Bar ............................................................................................................................16
Sharpening Saw Chain.....................................................................................................................16
Replacing Saw Chain.......................................................................................................................17
STORAGE..........................................................................................................................18
TECHNICAL SERVICE......................................................................................................18
REPLACEMENT PARTS AND ACCESSORIES ...............................................................18
REPAIR SERVICE .............................................................................................................18
Warranty Service..............................................................................................................................18
Non-Warranty Service ......................................................................................................................18
TROUBLESHOOTING.......................................................................................................19
WARRANTY INFORMATION.............................................................................................20
ILLUSTRATED PARTS BREAKDOWN/............................................................................63
Models/Modelos/Modèles 107624-02 ..............................................................................................64
ILLUSTRATED PARTS BREAKDOWN.............................................................................65
Models/Modelos/Modèles 107625-02 & 111174-01..........................................................................66
PARTS CENTRAL .............................................................................................................67
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
• eye protection such as safety glasses, goggles,
or face screen
• safety hard hat
• ear mufflers or ear plugs
WARNING: When using an electric
chain saw, basic safety precautions
shouldalwaysbefollowedtoreducethe
risk of fire, electric shock, and injury to
persons, including the following:
• hair covering to contain long hair
• face or dust mask (if working in dusty areas)
10. Before cutting, always provide the following:
• clear work area
READ ALL INSTRUCTIONS.
• secure footing
Make sure you read and understand all in-
structionsinImportantSafetyInformation
onpages3through5.Improperuseofthis
chainsawcancausesevereinjuryordeath
from fire, electrical shock, body contact
with moving chain, or falling wood.
• planned retreat path from falling tree
11. Inspect tree before cutting down. Make sure there are
no dead limbs or branches that may fall on you.
12. To reduce the risk of electric shock, this saw has a
polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet of
your extension cord, reverse the plug. If it still
does not fit, a polarized extension cord will be
necessary. Do not change the plug in any way.
BEFORE OPERATING SAW
1. Read and understand this owner’s manual before
operating chain saw.
2. Watch what you are doing. Use common sense.
Do not operate saw when you are tired.
3. Use chain saw for cutting wood only. Do not use
chain saw for purpose not intended. Do not use
for cutting plastic, masonry, etc.
WHILE OPERATING SAW
1. Stay alert. Use common sense while operating
chain saw.
2. Keep work area clean. Cluttered areas invite
injuries.
4. Only well-instructed adults should operate chain
saw. Never allow children to operate chain saw.
5. Use only electrical voltage noted on model plate
of chain saw.
6. Use only extension cords marked for outdoor use.
See page 10 for extension cord requirements.
7. Do not operate chain saw
3. Be aware of extension cord while operating chain
saw. Be careful not to trip over cord. Keep cord
away from chain and operator at all times.
4. Keep children, animals, and bystanders away
from chain saw and extension cord. Only chain
saw user should be in work area.
• while under the influence of alcohol, medica-
tion, or drugs
• in rain or in damp or wet areas
5. Do not cut down a tree unless you are trained or
have expert help.
6. If two or more persons perform bucking and fell-
ing operations at the same time, provide plenty
of distance between operations. Provide distance
of at least twice the height of tree being felled.
7. Secure wood you are cutting by using clamps or
chocks.
8. Grip chain saw firmly with both hands. Never
operate chain saw with one hand. Never use hand
guard as handle.
9. Keep finger off trigger until ready to make cut.
10. Before starting chain saw, make sure chain is not
touching anything.
11. To guard against electrical shock, avoid body
contact with grounded objects such as pipes,
fences, and metal posts.
• where highly flammable liquids or gases are
present
• if saw is damaged, adjusted wrong, or not fully
and securely assembled
• if trigger does not turn saw on and off. Chain
must stop moving when you release trigger.
Have faulty switch replaced by authorized ser-
vice center (see Technical Service, page 16).
• while in a hurry
• while in tree or on a ladder unless trained to
do so
8. Wear snug-fitting clothes when operating chain
saw. Do not wear loose clothing or jewelry. They
can get caught in moving saw chain.
9. Wear the following safety gear when operating
chain saw.
12. Keep all parts of body away from chain when
saw is running.
13. Do not force chain saw while cutting. Apply light
pressure. It will do the job better and safer at the
rate for which it was intended.
• heavy-duty gloves (wear rubber gloves when
working outdoors)
• steel-toed safety footwear with non-skid soles
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
14. Cut small brush and saplings with extreme care.
Slender material may catch in chain and be
whipped toward you. This could also pull you
off balance.
15. When cutting limb or tree trunk that is under
tension, use extreme caution. Be alert for wood
springing back. When wood tension is released,
limb could spring back and strike operator caus-
ing severe injury or death.
KICKBACK
WARNING:Kickbackmayoccurwhen
the nose or tip of the guide bar touches
an object, or when the wood closes in
and pinches the saw chain in the cut.
Tip contact in some cases may cause a
lightningfastreversereaction,kickingthe
guide bar up and back towards the opera-
tor. Pinching the saw chain along the top
of the guide bar may push the guide bar
rapidly back towards the operator. Either
of these reactions may cause you to lose
control of the saw which could result in
serious injury to user.
16. Carry chain saw from one place to another
• with saw stopped and unplugged
• by holding front handle (never use hand guard
as handle)
• with finger off trigger
• with guide bar and chain to rear
Kickback Safety Devices On This Saw
This saw has a low-kickback chain and reduced
kickback guide bar. Both items reduce the chance of
kickback. Kickback can still occur with this saw.
Follow assembly instructions on page 9. Do not
remove front hand guard. Do not replace front hand
guard with substitute.
WARNING: This product contains
chemicals known to the State of Cali-
fornia to cause cancer or birth defects,
or other reproductive harm.
The following steps will reduce the risk of kickback.
• Use both hands to grip saw while saw is running.
Use firm grip. Thumbs and fingers must wrap
around saw handles.
• Keep all safety items in place on saw. Make sure
they work properly.
• Do not overreach or cut above shoulder height.
• Keep solid footing and balance at all times.
• Stand slightly to left side of saw. This keeps your
body from being in direct line with chain.
• Do not let guide bar nose touch anything when
chain is moving (see Figure 1).
WARNING: Some dust created by
power sanding, sawing, grinding, drill-
ing, and other construction activities
contains chemicals known (to the state
of California) to cause cancer, birth de-
fects, or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints
• crystalline silica from bricks and ce-
ment and other masonry products
• arsenic and chromium from chemi-
cally-treated lumber
Your risk from these exposures varies,
depending on how often you do this
type of work. To reduce your exposure
to these chemicals: work in a well venti-
latedarea,andworkwithapprovedsafety
equipment, such as those dust masks
that are specially designed to filter out
microscopic particles.
Direction
Do Not Let Guide Bar
Touch Here
90° Quadrant
Figure 1 - Kickback Hazard Example: Do Not
Let Nose of Guide Bar Touch Object While
Chain is Moving
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
• Never try cutting through two logs at same time.
Only cut one log at a time.
• Do not bury guide bar nose or try plunge cut (boring
into wood using guide bar nose).
• Watch for shifting of wood or other forces that may
pinch chain.
• Use extreme caution when reentering a previous cut.
• Use low-kickback chain and guide bar supplied
with this chain saw. Only replace these parts with
chains and guide bars listed in this manual.
• Never use dull or loose chain. Keep chain sharp
with proper tension.
• Inspect extension cords often and replace if
damaged.
4. When servicing, use only identical replacement
parts.
5. When not in use, always store chain saw
• drain oil after each use and before storing
saw to prevent oil leakage.
• in a high or locked place, out of children’s
reach
• in a dry place
• in a carrying case or with scabbard over guide
bar
Saw Maintenance and Kickback
Safety
Follow maintenance instructions in this manual. Proper
cleaning of saw and chain and guide bar maintenance
can reduce chances of kickback. Inspect and maintain
saw after each use. This will increase the service life of
your saw. Note: Even with proper sharpening, risk of
kickback can increase with each sharpening.
UNPACKING
1. Remove all items from carton.
2. Check all items for any shipping damage. If
you find any damage or if any parts are missing,
call Technical Services at 1-800-626-2237 for
prompt service.
MAINTENANCE AND STORAGE OF
CHAIN SAW
1. Unplug chain saw from power source
• when not in use
SAVE THESE
INSTRUCTIONS
• before moving from one place to another
• before servicing
• before changing accessories or attachments,
such as saw chain and guard
2. Inspect chain saw before and after each use.
Check saw closely if guard or other part has
been damaged. Check for any damage that may
affect operator safety or operation of saw. Check
for alignment or binding of moving parts. Check
for broken or damaged parts. Do not use chain
saw if damage affects safety or operation. Have
damage repaired by authorized service center.
3. Maintain chain saw with care.
• Never expose saw to rain.
• Keep chain sharp, clean, and lubricated for
better and safer performance.
• Follow steps outlined in this manual to sharpen
chain.
• Keep handles dry, clean, and free of oil and
grease.
• Keep all screws and nuts tight.
• Inspect power cord often. If damaged, have
repaired by authorized service center.
• Never carry chain saw by power cord.
• Never yank power cord to unplug it.
• Keep power cord from heat, oil, and sharp
edges.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT IDENTIFICATION
Switch Lockout
Oil Cap
Oil Level Sight
Front Handle with Hand Guard
Rear Handle
Power Cord
Guide Bar Nose
Saw Chain
Chain Tensioning Screw
Trigger
Guide Bar
Cord Hitch
Figure 2 - Chain Saw Model 107624-02
Oil Level Sight
Oil Cap
Switch Lockout
Rear Handle
Front Handle with Hand Guard
Power Cord
Guide Bar Nose
Saw Chain
Cord Hitch
Trigger
Guide Bar
Chain Tensioning Knob
Figure 3 - Chain Saw Model 107625-02, 111174-01
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAIN SAW NAMES AND TERMS
Bucking Process of cutting a felled tree or log into Rear Handle Handle located at rear of saw body.
lengths.
Reduced Kickback Guide Bar Guide bar that re-
Chock Block or wedge used to secure wood from duces chance of kickback.
moving.
Replacement Chain Chain that complies with ANSI
B175.1 when used with a specific saw. It may not meet
ANSI requirements when used with other saws.
Saw Chain (Chain) Loop of chain having cutting
teeth for cutting wood. The motor drives chain. The
guide bar supports chain.
Spiked Bumper (Spike) Pointed teeth at front of
saw body beside guide bar. Keep spiked bumper in
contact with wood when felling or bucking. It helps
maintain position of saw while cutting.
Sprocket Toothed wheel that drives chain.
Switch Device that completes or interrupts electrical
circuit to motor of saw.
Switch Linkage This device connects switch to trig-
ger. It moves switch when you squeeze trigger.
Switch Lockout Device that reduces accidental
starting of saw.
Felling Process of cutting down a tree.
Felling Cut Final cut when felling a tree. Make this
cut on opposite side of tree from notching cut.
Front Handle Located at front of saw body.
Front Hand Guard Shield between front handle and
guide bar. Protects left hand while using saw.
Guide Bar Metal bar that extends from saw body.
The guide bar supports and guides chain.
Guide Bar Nose Tip or end of guide bar.
Kickback Quick backward and upward motion of
guide bar. Kickback may occur when tip of guide bar
touches an object while chain is moving. The guide
bar will kick up and back towards operator.
Limbing Process of cutting limb(s) from a felled tree.
Low-Kickback Chain Chain that reduces chance of
kickback as required by ANSI B175.1.
Trigger Device that turns saw on and off. Squeezing
trigger turns saw on. Releasing trigger turns saw off.
Trimming (Pruning) Process of cutting limb(s) from
a living tree.
Undercut An upward cut from underside of log or
limb. This is done while in normal cutting position
and cutting with top of guide bar.
Normal Cutting Position Stance used while making
bucking and felling cuts.
Notching Cut Notch cut in tree that directs fall of tree.
Oiler Control System for oiling guide bar and chain.
Power Head Chain saw without chain and guide
bar. Also known as saw body.
Pushback (Kickback, Pinch) Rapid pushback of chain
saw. Pushback may occur if chain along top of guide
bar is pinched, caught, or contacts a foreign object.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Note: Some models are pre-assembled. Assembly
is not needed on these models. See Saw Chain Ten-
sion Adjustment.
CAUTION:Donotplacechainonsaw
backwards. If chain is backwards, saw
will vibrate badly and will not cut.
WARNING: Cutting edges on chain
are sharp. Use protective gloves when
handling chain.
7. Insert tab of sprocket cover into slot on side cover
and rotate sprocket cover onto guide bar bolts
until sprocket cover rests against guide bar.
8. Place guide bar nuts, removed in step 2, over
guide bar bolts.
IMPORTANT: Do not clamp chain saw in
vise during assembly.
IMPORTANT: Tighten guide bar nuts finger tight
only.
1. Lay chain out flat.
2. Loosen and remove guide bar nuts and sprocket
cover.
3. Loosen and remove drive sprocket screw or re-
move E-ring from shaft (see Figure 4). Remove
sprocket support.
4. Install guide bar onto saw body. Assemble center
slot of guide bar onto guide bar bolts.
5. To replace sprocket support, repeat step 3 in re-
verse order. Firmly tighten drive sprocket screw
with #2 Phillips screwdriver (if applicable).
6. Place chain around drive sprocket, along top
groove of guide bar, and around guide bar nose.
Note: Make sure cutting edges of chain are fac-
ing in right direction. Position chain so cutting
edges on top of guide bar face guide bar nose (see
Figure 4, and indicator on side cover of saw).
9. Turning chain tensioning knob (Model 107625
-02, 111174-01) or chain tensioning screw
(Model 107624-02), adjust position of adjust-
ment block until it is aligned and inserted into the
round adjusting hole on guide bar (see Figure 4,
5and 6). Turning chain tensioning knob or chain
tensioning screw counterclockwise will move
adjustment block to rear of guide bar. Turning
chain tensioning knob or chain tensioning screw
clockwise will move adjustment block to front
of guide bar.
10. If needed, readjust guide bar nuts to finger tight only.
11. Adjust saw chain tension. Follow steps under
Saw Chain Tension Adjustment.
Drive Sprocket
Sprocket Support
Drive Sprocket Screw or E-Ring
Guide Bar Bolts
Guide Bar
Saw Chain
Sprocket Cover
Adjusting
Hole
Towards Guide Bar Nose
Cutting Edge
Guide Bar Nuts
Figure 4 - Assembling Guide Bar and Chain
Adjustment Block
Adjustment
Block
E-Ring
Chain Tensioning Knob
Chain Tensioning Screw
Figure6-TurnChainTensioningKnobonModel
107625-02, 111174-01
Figure 5 - Turn Chain Tensioning Screw on
Model 107624-02
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SAW CHAIN TENSION ADJUSTMENT
Model 107624-02
WARNING: Unplug chain saw from
power source before adjusting saw
chain tension.
E
N
T
H
G
I
T
WARNING: Cutting edges on chain
are sharp. Use protective gloves when
handling chain.
Turnchaintensioningscrewclockwise
to tension saw chain or...
WARNING: Maintain proper chain
tension always. A loose chain will in-
creasetheriskofkickback.Aloosechain
may jump out of guide bar groove. This
may injure operator and damage chain.
Aloosechainwillcausechain,guidebar,
and sprocket to wear rapidly.
Models 107625-02,
and 111174-01
T G
I
H
T
E
N
IMPORTANT!
Failure to follow these instructions when tensioning
saw chain will damage saw and void the warranty.
For additional information call 1-800-626-2237.
New saw chains will stretch. Check chain tension
frequently when first used and tighten when chain
becomes loose around guide bar.
Turnchaintensioningknobclockwise
to tension saw chain...
Guide Bar
Approx.
5/32"
Pull chain to check tension. Guide
links should not come out of guide
bar groove...
Ifchainbecomesloosearoundguide
bar, allow chain to cool then...
G
H
I
T
T
E
N
G
H
T
T
E
N
O
LO
S
E
N
O
O
L
S
E
N
Makesurechainmovesfreelyaround
guide bar then tighten both nuts.
Loosen both nuts...
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING CHAIN SAW
WARNING:Readandunderstandthis
owner’smanualbeforeoperatingthissaw.
Make certain you read and understand all
Important Safety Information. Improper
use of this chain saw can cause severe
injuryordeathfromfire,electricalshock,
or body contact with moving chain, or
falling wood.
Oil Sight Window
Figure 8 - Oil Sight Window Location for Model
107625-02, 111174-01
FILLING OIL TANK
1. Remove oil cap.
EXTENSION CORDS
2. Fill oil tank with SAE #30 motor oil. Note: For
temperatures below 30°F, use SAE #10 oil. For
temperatures above 75°F, use SAE #40 oil.
3. Replace oil cap at once. Tighten oil cap firmly for
good seal. This will avoid oil seepage from tank.
4. Wipe off excess oil.
Note: It is normal for oil to seep when saw is not in
use. Empty oil tank after each use to prevent seep-
age.
Use proper extension cords with this saw. Use only
extension cords marked for outdoor use. The cord must
be marked with suffix W or W-A following the cord
type designation. Example: SJTW-A or SJTW.
Use proper sized cord with this saw. Cord must be heavy
enough to carry current needed. An undersized cord will
cause voltage drop at saw. Saw will lose power and over-
heat. Follow cord size requirements listed below.
Cord Length
AWG Cord Size
IMPORTANT: DO NOT USE BAR AND
CHAIN OIL
25 feet
50 feet
100 feet
150 feet
16 AWG
16 AWG
14 AWG
12 AWG
OILING CHAIN
Manual Oil System
Always check oil level before using saw. Do not
attempt to operate the oil system while saw is in
operation. To oil chain, press squeeze bulb. Oil will
feed onto the guide bar and chain. Press squeeze bulb
at least once before each cut. Check oil level often by
looking at oil sight window (see Figure 7).
Keep cord away from cutting area. Make sure cord
does not catch on branches or logs during cutting.
Inspect cords often. Replace damaged cords.
This chain saw is designed with an extension cord hitch
that prevents the extension cord from being pulled loose
during use. To use, form a loop with the end of the
extension cord, insert loop into slot in rear of handle,
and place loop over cord hitch (see Figure 9). Gently
pull loop against cord hitch until slack is removed.
Plug extension cord into chain saw cord.
Oil Squeeze Bulb
Oil Sight Window
Power Cord
Figure7-OilSqueezeBulbandOilSightWindow
Location for Model 107624-02
Cord Hitch
Automatic Oil System
Chain saw Model 107625-02, 111174-01 is equipped
with an automatic oiling system. It will provide ad-
equate lubrication to the guide bar and saw chain. Check
oil level every 15 minutes of cutting time. Oil level can
be seen in oil sight window (see Figure 8).
Extension Cord
Figure 9 - Looping Extension Cord over Cord
Hitch
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING CHAIN SAW
CUTTING WITH THE CHAIN SAW
1. Connect saw to extension cord. Connect exten-
sion cord to power supply.
FELLING A TREE (Cutting Down a
Tree)
2. Make sure section of log to be cut is not laying
on ground. This will keep chain from touching
ground as it cuts through log. Touching ground
with moving chain will dull chain.
WARNING:
• Avoid kickback. Kickback can result in
severe injury or death. See Kickback to
avoid risk of kickback.
3. Use both hands to grip saw. Always use left hand
to grip front handle and right hand to grip rear
handle. Use firm grip. Thumbs and fingers must
wrap around saw handles (see Figure 10).
4. Make sure your footing is firm. Keep feet apart.
Divide your weight evenly on both feet.
5. When ready to make a cut, push the lockout
button completely forward with the right thumb
and squeeze the trigger (see Figure 10). This will
turn saw on. Releasing trigger will turn saw off.
Make sure saw is running at full speed before
starting a cut.
6. When starting a cut, place moving chain against
wood. Hold saw firmly in place to avoid possible
bouncing or skating (sideways movement) of saw.
7. Guide saw using light pressure. Do not force
saw. The motor will overload and can burn out.
It will do the job better and safer at the rate for
which it was intended.
• Do not fell a tree without ample skill or
expert help.
• Keepchildren,animals,andbystanders
away from area when felling a tree.
• If two or more persons perform buck-
ing and felling operations at the same
time, provide ample distance between
operations.Providedistanceofatleast
twice the height of tree being felled.
WARNING: When felling a tree, be
aware of your surroundings. Do not
endangeranyperson, strikeutilitylines,
orcausepropertydamage.Iftreestrikes
utility lines, contact utility company at
once.
Felling is the process of cutting down a tree. Make
8. Remove saw from a cut with saw running at full sure your footing is firm. Keep feet apart. Divide
speed. Stop saw by releasing trigger. Make sure your weight evenly on both feet. Follow directions
chain has stopped before setting saw down.
9. Practice until you can maintain a steady, even
cutting rate.
below to fell a tree.
Before Felling a Tree
1. Before felling, inspect tree. Make sure there are
no dead limbs or branches that may fall on you.
Study natural lean of tree, location of larger
branches, and wind direction. This will help you
judge which way tree will fall.
Switch Lockout Button
2. Clear work area around tree.
3. Plan and clear a retreat path before felling. Make
retreat path opposite to planned direction of fall
of tree and at 45° angle (see Figure 11).
Retreat Path
Direction of Fall
Trigger
Figure 10 - Lockout Button and Trigger
Location
Tree
45°
Retreat Path
Figure 11 - Retreat Path From Tree
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING CHAIN SAW
4. Remove dirt, stones, loose bark, nails, staples, and
wire from tree where you will make felling cuts.
5. Stay on uphill side when felling tree. Tree could
roll or slide downhill after falling.
Direction of Fall
3rd Cut -
Felling Cut
Hinge
2"
(5 cm)
2nd Cut - Upper Notch Cut
1st Cut - Lower Notch Cut
Felling Procedure
A) Felling Notch
2"(5 cm)
A properly placed felling notch will determine direc-
tion tree will fall. Place felling notch on side of tree in
direction you want tree to fall (see Figure 12). Follow
directions below to create a felling notch.
1. Make lower notch cut as close to ground as
possible. Hold saw so guide bar is horizontal.
Cut 1/3 the diameter of tree trunk (see Figure
12). Note: Always make this horizontal lower
notch cut first. If you make this cut second, tree
can pinch chain or guide bar.
Figure 12 - Felling A Tree
2. Cut towards notch.
3. As felling cut nears hinge, tree should begin to fall.
Note: If needed, drive wedges into felling cut to
control direction of fall. If tree settles back and
pinches chain, drive wedges into felling cut to re-
move saw. Only use wedges made of wood, plastic,
or aluminum. Never use wedge made of steel. This
could cause kickback and damage to chain.
4. When tree begins to fall, quickly
• remove saw from felling cut
2. Start upper notch cut the same distance above
first cut as first cut is deep.
Example: If lower notch cut is eight inches deep,
start upper notch cut eight inches above it. Cut
downward at 45° angle. The upper notch cut should
meet end of lower notch cut (see Figure 12).
3. Remove tree trunk wedge created by notching
cuts.
• release trigger to turn saw off
• put saw down
• exit area using retreat path
B) Felling Cut
1. Make felling cut two inches higher than lower
notch cut and on opposite side of tree (see Figure
12). Keep felling cut parallel to lower notch cut.
WARNING: Do not cut all the way
through tree. Leave about two inches
of tree diameter uncut directly behind
felling notch (see Figure 12). This uncut
portion acts as a hinge. The hinge helps
keep tree from twisting and falling in
wrong direction.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING CHAIN SAW
BUCKING A LOG
WARNING: Be alert for falling over-
head limbs. Watch your footing while
exiting area.
WARNING:Avoidkickback.Kickback
can result in severe injury or death. See
Kickback to avoid risk of kickback.
LIMBING A TREE
WARNING:Avoidkickback.Kickback
can result in severe injury or death. See
Kickback to avoid risk of kickback.
WARNING:
• If on slope, make sure log will not roll
downhill. Securelogbyusingwooden
stakes. Drive wooden stakes into
ground on downhill side of log. Stand
on uphill side of log while cutting. Log
may roll after cutting.
• Never try cutting through two logs at
sametime.Thiscouldincreasetherisk
of kickback.
• While cutting log, never hold log with
your hand, leg, or foot.
• While cutting log, never allow another
person to hold log.
WARNING: When cutting limb that
is under tension, use extreme caution.
Be alert for wood springing back. When
wood tension is released, limb could
spring back and strike operator causing
severe injury or death.
Limbing is removing branches from a fallen tree.
Make sure your footing is firm. Keep feet apart.
Divide your weight evenly on both feet. Do not
remove larger limbs under tree that support log off
ground. Remove each limb with one cut (see Figure
13). Clear cut limbs from work area often. This will
help maintain a safe work area.
Make sure you start your cut where limb will not
pinch saw during cutting. To avoid pinching, start cut
on freely hanging limbs from above limb. Start cut on
limbs under tension from under limb. If pinch occurs,
turn saw off, lift limb, and remove saw.
• Turnoffandunplugsawbeforemoving
from one place to another.
Bucking a log is cutting a log into sections. Make
sure your footing is firm. Keep feet apart. Divide your
weight evenly on both feet. When possible, raise log
or section off ground. Do this by using limbs, logs,
chocks, etc.
When cutting through log, maintain control by reduc-
ing cutting pressure near end of cut. Do not relax your
grip on chain saw handles. Do not let moving chain
touch ground. Ground will dull moving chain. After
cutting through log, release trigger to turn saw off
before moving saw.
Follow directions below to buck a log.
Entire Length Of Log On Ground
Cut log from top (see Figure 14).
Figure 13 - Limbing A Tree
Figure 14 - Bucking Log With Entire Length
On Ground
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING CHAIN SAW
Log Supported On One End
TRIMMING A TREE (Pruning)
1. Make first cut on underside of log (see Figure
15). Use top of guide bar to make this cut. Cut
1/3 through diameter of log. This cut will keep
section from splintering when cut.
2. Make second cut directly above first cut. Cut
down to meet first cut. This cut will keep log
from pinching guide bar and chain.
WARNING:Avoidkickback.Kickback
can result in severe injury or death. See
Kickback to avoid risk of kickback.
WARNING: Do not operate chain
saw while
• in a tree
• on a ladder or any other unstable sur-
face
• in any awkward position
Log Supported On Both Ends
1. Make first cut from above log (see Figure 16).
Cut 1/3 through diameter of log. This cut will
keep section from splintering when cut.
2. Make second cut on underside of log, directly
under first cut. Use top of guide bar to make this
cut. Cut up to meet first cut. This will keep log
from pinching guide bar and chain.
You may lose control of saw causing
severe injury.
WARNING: Do not cut limbs higher
than your shoulders.
CAUTION: Seek professional help if
facing conditions beyond your ability.
2nd Cut
Trimming a tree is the process of cutting limbs from
a living tree. Make sure your footing is firm. Keep
feet apart. Divide your weight evenly on both feet.
Follow directions below to trim a tree.
1st Cut
1. Make first cut six inches from tree trunk on
underside of limb. Use top of guide bar to make
this cut. Cut 1/3 through diameter of limb (see
Figure 17).
Figure15-BuckingLogWhenLogIsSupported
On One End
2. Move two to four inches farther out on limb.
Make second cut from above limb. Continue cut
until you cut limb off.
1st Cut
3. Make third cut as close to tree trunk as possible
on underside of limb stub. Use top of guide bar to
make this cut. Cut 1/3 through diameter of stub.
4. Make fourth cut directly above third cut. Cut down
to meet third cut. This will remove limb stub.
2nd Cut
2nd Cut - Pruning Cut (to avoid pinching)
Figure16-BuckingLogWhenLogIsSupported
On Both Ends
4th Cut - Final Stub Cut
6"
(15 cm)
2" to 4"
(5 a 10 cm)
1st Cut - Pruning Undercut (to
avoid splintering)
3rd Cut - Stub Undercut (to avoid
splintering)
Figure 17 - Cutting A Limb
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING AND MAINTENANCE
Normal Guide Bar Maintenance
1. Remove guide bar from chain saw.
2. Remove sawdust from guide bar groove periodi-
cally. Use putty knife or wire (see Figure 19).
3. Clean oil slots after each day of use.
4. Remove burrs from sides of guide bar. Use flat
file to make side edges square.
NOTICE: Below are instructions for ser-
vicingyourchainsaw.Anyservicingnot
mentioned below should be done by an
authorized service center.
CLEANING SAW BODY
Replace guide bar when
• bar is bent or cracked
WARNING: Unplug chain saw from
powersourcebeforeservicing.Severeinjury
or death could occur from electrical shock
or body contact with moving chain.
• inside groove of bar is badly worn
Note: When replacing guide bar, see Replacement
Parts and Accessories for proper bar.
SHARPENING SAW CHAIN
WARNING: Cutting edges on chain
are sharp. Use protective gloves when
handling chain.
WARNING: Unplug chain saw from
powersourcebeforeservicing.Severeinjury
or death could occur from electrical shock
or body contact with moving chain.
WARNING: When cleaning saw body,
• do not submerge saw in any liquids
• do not use products that contain am-
monia, chlorine, or abrasives
• do not use chlorinated cleaning sol-
vents, carbon tetrachloride, kerosene,
or gasoline
WARNING: Cutting edges on chain
are sharp. Use protective gloves when
handling chain.
Keep chain sharp. Your saw will cut faster and more
safely. A dull chain will cause undue sprocket, guide
bar, chain, and motor wear. If you must force chain
into wood and cutting creates only sawdust with few
large chips, chain is dull.
Keep saw body clean. Use a soft cloth dampened with a
mild soap and water mixture. Wipe saw body to clean.
CARE OF GUIDE BAR
Burr
Uneven bar wear causes most guide bar problems.
Incorrect sharpening of chain cutter and depth gauge
settings often cause this. When bar wears unevenly,
it widens guide bar groove (see Figure 18). This
causes chain clatter and rivet popping. Saw will not
cut straight. Replace guide bar if this occurs.
Inspect guide bar before sharpening chain. A worn or
damaged guide bar is unsafe. A worn or damaged guide
bar will damage chain. It will also make cutting harder.
Flat File
Guide Bar
Guide Bar Groove
Cleaning Groove With Putty Knife
Guide Bar
Oil Slot
Normal Guide
Bar
Guide Bar With
Uneven Wear
Figure 19 - Guide Bar Maintenance
Figure 18 - Guide Bar Cross Section Showing
Uneven Bar Wear
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING AND
MAINTENANCE
Continued
Items Needed to Sharpen Chain
Purchase these items from your local dealer, hard-
ware store, or chain saw supplies outlet.
• 5/32" round file
• Depth gauge tool
• File guide
• Vise
• Medium sized flat file
4. Hold file guide level. Make sure 30° mark on
file guide is parallel to center of guide bar (see
Figure 20). This will insure that you file cutters
at 30° angle.
5. File from inside towards outside of cutter until
sharp. Only file in this one direction (see Figure
20). Note: Two or three strokes with file should
sharpen cutter.
6. After each cutter is sharpened, move chain for-
ward to sharpen next cutter. File all cutters on
one side of chain.
7. Move to other side of chain and repeat process.
Sharpening Cutters
Use file guide for 30° filing.
1. Adjust chain for proper tension (see Saw Chain
Tension Adjustment).
2. Clamp guide bar in vise to hold saw steady.
Note: Do not clamp chain.
3. Press 5/32" round file (attached to file guide)
into groove between top plate and depth gauge
on chain. File guide should rest on both top plate
and depth gauge (see Figure 20). Note: File at
Filing Cutter Depth Gauges
The cutter depth gauge clearance is reduced as cutters
are sharpened. After every second or third sharpen-
ing, reset cutter depth gauges.
1. Place depth gauge tool (.025") firmly across top
of two cutters. Make sure depth gauge enters slot
in depth gauge tool (see Figure 22).
2. Use medium flat file. File depth gauge level with
depth gauge tool.
3. Remove depth gauge tool. With flat file, round
off front corner of cutter depth gauge (see Figure
23).
midpoint of guide bar.
Filing Direction
30° Guide Mark
File Guide
After several hand filings, have authorized service
center or sharpening service machine sharpen chain.
This will insure even filing.
5/32" Round File
REPLACING SAW CHAIN
Replace chain when cutters are too worn to sharpen or
when chain breaks. Only use replacement chain noted in
this manual. Always include new drive sprocket when
replacing chain. This will maintain proper driving of
chain. Note: For proper chain and drive sprocket,
see Replacement Parts and Accessories.
Flat File
Depth
Gauge
Note: This illustration shows file guide placement and filing direction
for sharpening cutters on left side of chain.
Depth Gauge Tool
Figure 20 - File and File Guide Placement On
Chain
Depth Gauge (right
side of chain)
Depth Gauge Slot
Depth Gauge (left
side of chain)
Groove
Figure 22 - Depth Gauge Tool On Chain
Groove
Front Corner
.025"
.635 mm
Top Plate (left side
of chain)
Top Plate (right side of
chain)
Right Side of Chain
Figure 23 - Round Off Front Corner Of Depth
Gauge
Figure 21 - Chain Part Locations
17
Download from Www.Somanuals.com. All Manuals Search And Download.
REPLACEMENT CHAINS
Replacement saw chains may be available at your
local hardware or home improvement store.
The following list gives the specifications for replace-
ment chains.
All chains will be .050 gauge, 3/8 pitch.
14" chains have 56 drive links
REPLACEMENT PARTS AND
ACCESSORIES
WARNING: Use only replacement
parts and accessories described in this
manual. Useofotherpartsoraccessories
could damage saw or injure operator.
16" chains have 58 drive links
You may also order the replacement saw chains from
com using the part number listed in the illustrated
parts list on pages 63-66 of this manual.
For original replacement parts and accessories, con-
tact your nearest Authorized Dealer or Authorized
Service Center for this product. If they can not sup-
ply the part or accessory, contact your nearest Parts
Central listed on page 67. Each Authorized Dealer,
Authorized Service Center, and Parts Central is
independently owned and operated.
See pages 63 through 66 for an Illustrated Parts List.
If you need additional referral information, contact our
Technical Service Department (see Technical Service).
In Canada call 1-800-561-3372 for parts information.
STORAGE
If storing saw for more than 30 days, follow steps below.
1. Drain oil tank after each use.
2. Remove and clean guide bar and chain. Clean
guide bar and chain by soaking in petroleum
based solvent or mild soap and water mixture.
3. Dry guide bar and chain.
4. Place chain in container filled with oil. This will
prevent rust.
5. Wipe a thin coating of oil over surface of guide bar.
6. Wipe off outside of saw body. Do this with soft cloth
dampened with a mild soap and water mixture.
7. Store chain saw
REPAIR SERVICE
Note: Only use original replacement parts. This will
protect your warranty coverage for parts replaced
under warranty.
Each Authorized Service Center is independently
owned and operated.
• in a high or locked place, out of children’s reach
• in a dry place
Warranty Service
If product requires warranty service, return it to nearest
Authorized Service Center. You must show proof of
purchase. If faulty materials or workmanship caused
damage, we will repair or replace product without
charge. Note: Normal wear, misuse, abuse, neglect, or
accidental damage is not covered under warranty.
• in a carrying case or with scabbard over guide bar
TECHNICAL SERVICE
You may have further questions about assembling,
operating, or maintaining this product. If so, you
can visit our Technical Service web site at www.
remingtonpowertools.com or contact our Techni-
cal Service Department at 1-800-626-2237 (English
Only). You may also write to:
DESA Power Tools
ATTN: Technical Service
P.O. Box 90004
Non-Warranty Service
If product requires service, return it to nearest Au-
thorized Service Center. Repairs will be billed to you
at regular repair list prices.
For additional Service Center or warranty informa-
tion, call 1-800-626-2237 or visit our Technical Ser-
vice web site at www.remingtonpowertools.com.
Bowling Green, KY 42102-9004
When contacting DESA Power Tools, have ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (Include copy of receipt for writ-
ten requests).
We reserve the right to amend these specifications
at any time without notice. The only warranty ap-
plicable is our standard written warranty. We make
no other warranty expressed or implied.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
powertools.com.
WARNING: Unplug chain saw from power source before servicing. Severe injury or
death could occur from electrical shock or body contact with moving chain.
OBSERVED FAULT POSSIBLE CAUSE
REMEDY
Saw runs, but does not Chain assembled backwards on See Assembly
cut guide bar
Saw does not cut unless Chain is dull
heavily forced. Cutting
produces only sawdust
with few large chips
See Sharpening Saw Chain
Saw runs slow. Saw stalls Low power supply voltage
easily
Extension cord wire size too small. See
Extension Cords.
Motor of saw does not 1. Switch lockout not pushed for- 1. Push switch lockout forward before
run when you squeeze
trigger
ward in to release trigger
2. Extension cord connections
loose
squeezing trigger
2. Check cord connections
3. Open line fuse or circuit breaker 3. Check line fuse or circuit breaker
4. Worn out motor brushes
5. Open wiring circuit on saw
4. See authorized service center
5. See authorized service center
Motor of saw runs, but Gear Sprocket
chain does not move
Remove and inspect gear sprocket for
damage
Chain does not get oil
All Models
1. Clogged oil slot in guide bar
2. Oil is too thick
1. Remove guide bar and clean oil slot
2. Use correct weight of oil. See Filling
Oil Tank
Modles with Automatic Oiler
1. Vent in oil cap clogged
2. Filter in oil reservoir clogged
1. Remove cap and clean vent hole
2. Remove filterin oil reservoir and
clean
3. Pump damaged, do not use saw 3. See authorized service center
Chain comes off guide 1. Chain is loose
bar
1. Tighten chain. See Saw Chain Tension
Adjustment
2. Guide bar and chain not as- 2. See Assembly
sembled correctly
Saw smokes
Saw leaks oil
Saw damaged. Do not use saw
See authorized service center
It is normal for oil to seep when the Tighten oil cap.
saw is not in use. Note: Empty oil tank when not in use.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
REMINGTON BRAND ELECTRIC CHAIN SAW
LIMITED WARRANTIES
NEW PRODUCTS
Standard Warranty
DESA Power Tools warrants this new product and any parts thereof to be free from defects in material
and workmanship for a period of one (1) year from the date of first purchase from an authorized dealer
provided the product has been maintained and operated in accordance with DESA Power Tools’ warn-
ings and instructions.
FACTORY RECONDITIONED PRODUCTS
Limited Warranty
DESA Power Tools warrants factory reconditioned products and any parts thereof to be free from defects
in material and workmanship for 90 days from the date of first purchase from an authorized dealer pro-
vided the product has been installed, maintained and operated in accordance with DESA Power Tools’
warnings and instructions.
TERMS COMMON TO ALL WARRANTIES
The following terms apply to all of the above warranties:
• Always specify model number when contacting the manufacturer. To make a claim under this warranty
the bill of sale or other proof of purchase must be presented.
• This warranty is extended only to the original retail purchaser when purchased from an authorized
dealer.
• This warranty covers the cost of part(s) required to restore this product to proper operating condition
and an allowance for labor when provided by a DESA Power Tools Authorized Service Center. War-
ranty parts must be obtained through authorized dealers of this product and/or DESA Power Tools
who will provide original factory replacement parts. Failure to use original factory replacement parts
voids this warranty.
• Travel, handling, transportation, diagnostic, material, labor and incidental costs associated with war-
ranty repairs, unless expressly covered by this warranty, are not reimbursable under this warranty and
are the responsibility of the owner.
• Excluded from this warranty are products or parts that fail or become damaged due to misuse, accidents,
lack of proper maintenance, tampering, or alterations.
• Excluded from this warranty are products purchased for commercial, industrial or rental usage.
• This is DESA Power Tools’ exclusive warranty, and to the full extent allowed by law; this express
warranty excludes any and all other warranties, express or implied, written or verbal and limits the
duration of any and all implied warranties, including warranties of merchantability and fitness for a
particular purpose to one (1) year on new products and 90 days on factory reconditioned products from
the date of first purchase. DESA Power Tools makes no other warranties regarding this product.
• DESA Power Tools’ liability is limited to the purchase price of the product, and DESA Power Tools
shall not be liable for any other damages whatsoever under any circumstances including indirect,
incidental, or consequential damages.
• Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
• This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
For information about this warranty contact:
Industries of Canada, Inc.
Model _____________________
82 Akron Road
Toronto, Ontario
Bowling Green, KY 42102-9004
M8W1T2
800-626-2237 (English Only)
416-255-5333
Fax: 416-255-5677
Date Purchased ____________
20
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES _____________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES _____________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
22
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE PIÈCES
Ray’s Portable Heater Service
3191 Myers Road
Camino, CA 95709-9550
530-644-7716
Hance Distributors, Inc.
12795 16th Avenue North
Plymouth, MN 55441-4556
763-559-2299
La Porte’s
2444 N 5th Street
Hartsville, SC 29550-7704
843-332-0191
Tool & Equipment
5 Manila Drive
Hamden, CT 06514-0322
203-248-7553
MTA Distributors
Automotive Equipment Service 555 Hickory Hills Blvd.
3117 Holmes
Kansas City, MO 64109-1716
816-531-9144
Nashville, TN 37189-9244
615-299-8777
1-800-264-0225
1-800-397-7553
1-800-843-3546
Grainger Parts Operations
1657 Shermer Road
Northbrook, IL 60062-5362
708-498-5900
1-800-323-0620
Webbs Appliance Center
1519 Church Street
Bowden Electric Motor Service Nashville, TN 37203-3004
1681 S. Wesleyan Blvd.
Rocky Mount, NC 27803
252-446-4203
615-329-4079
1-800-899-4079
Industrial Hardware
4109 Bainbridge Blvd.
Chesapeake, VA 23324-1403
757-543-2232
Portable Heater Parts
342 North County Road 400 East
Valparaiso, IN 46383-9704
219-462-7441
East Coast Energy
10 East Route 36
West Long Branch, NJ 07764-1501
1-800-755-8809
1-800-788-0008
1-800-362-6951
Forrest Lytle and Sons, Inc.
740 West Galbraith Road
Cincinnati, OH 45231-6002
513-521-1464
Mills Lawn and Garden
4750-B Baxter Road
Virginia Beach, VA 23464
757-490-7001
Lyons & Lyons Sales Co. Inc.
Glen Arm Road
Glen Arm, MD 21057-9454
301-665-6500
1-800-333-5966
Bortz Chain Saw Shop
Road #2, Box 64A
Oley, PA 19547-9412
610-987-6452
Tuco Industrial Products
5223 180th Street SW
Suite 4A-1
Lynnwood, WA 98037-4506
425-743-9533
21st Century
2950 Fretz Valley Road
Perkasie, PA 18944-4034
215-795-0400
Master Part Distributors
1251 Mound Avenue NW
Grand Rapids, MI 49504-2672
616-791-0505
1-800-735-1268
1-800-325-4828
1-800-446-1446
70
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES/NOTAS/REMARQUES ______________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
________________________________________________________
71
Download from Www.Somanuals.com. All Manuals Search And Download.
122503-01
Rev. A
03/08
Download from Www.Somanuals.com. All Manuals Search And Download.
|